1173 BT-002 DHC Digital Battery System Analyzer

• Application : 6V &12V Battery, 12V & 24V Charging / Starting System.
• Operating Range : 40 – 2000CCA (SAE)
• Rating system : SAE, DIN, EN, IEC, JIS
• Voltmeter : 1.5V ~ 30V
• Display : 2 Lines 16 Chracters LCD
• Test Lead : 31 inch / 80cm
• Language : English, French, Spanish, German, Italian, Portuguese
• Dimension : L198 x W114 x H53(mm)




1183 DHC BT-300 12V Digital Battery & Electrical System Tester

  • Designed to test WET, Gel Cell, AGM Flat Plate, AGM Spiral wound, Start-Stop AGM and EFB Enhanced Flooded batteries.
  • Microprocessor Controlled
  • Easy to Read LCD Display
  • No Heat & No Spark
  • Reverse Polarity Protection
  • Accurate Test Result in 2 Seconds
  • Specification:
    • Application Range: 12V Battery / 12V Electrical System
    • Operation Range: 40 ~ 1,200 CCA/SAE
    • Voltmeter: 4.5V ~ 15.99
  • Made In Taiwan

Operational Manual Included.




MEL-BC1250A Mello Inverter Intelligent Charge Power Supply

  • With overcurrent protection, power-down alarm, short circuit protection, reverse polarity protection, high temperature protection and self recovery function.
  • Specification:
    • Input Voltage: 220 ~ 240V
    • Frequency: 50/60Hz
    • Input Power: 600W
    • Maximum Effective Current: 50A RMS
    • Charge Voltage: 12V
    • Battery Capacity: 10 ~ 60Ah
    • Size: 35cm x 32cm x 12cm
    • Weight: 4.9kg
  • Made In China



1181 12V Vehicle Battery Tester

● This is a helpful tester for 12V vehicle battery.
● User is able to check the battery power level and the charging condition with various circumstances.
● It is also able to monitor the alternator condition by very easy procedure.
● Features:
● With a Magnetic Board on the back slide to fix on suitable metal sheet of cars easily.
● Voltage Range: DC 6 ~ 16V
● Reverse Polarity Protection: Yes
● Short Circuit Protection: Yes
● Over-Voltage Protection: Yes (Forward DC Voltage <30V for < 10 seconds)
● Made In Taiwan




1180 DHC BT-1000 Digital Battery Tester (Report Printable)

● BT1000 is a professional level battery and electrical system tester with built-in 2” thermal printer and
detachable clamp set that helps you to determine the conditions of battery & electrical system in seconds.
Battery, Cranking, & Charging system tester
6V & 12V battery / 12V START-STOP battery test / 12V & 24V cranking/charging system test / IR test.
4 Color LCD
Shows different color for different test result.
Built-in 2” Thermal Printer
Prints a receipt of test result with date.
Start/Stop Battery Test Available
Performs accurate test for Start/Stop batteries.




1040 GEFO Battery Hydrometer

Universal workshopdevice
• Sturdy design with straight plastic cylinder
• Small suction volume but large areometer – broad scale
• Centered areometer – no swinging, no lateral contact,  correct fast reading
• Coloured scale and numerical scale
• MADE IN GERMANY




1082 DC-12 Battery Load Tester

SUPER-LITE 6V & 12V battery tester is designed for fast and accurate monitoring of
battery condition. It is equipped with multiple test function such as battery load test,
motor cranking test and charging system test.

Robust design, light weight and large display are some of the special features that
provide user the flexibility of movement and fast judgement when carrying out tests.
Heavy duty insulated battery clamps are selected to ensure safe and proper application.

• Battery Rating : 6V and 12V batteries
• Checking Parameters : Battery load test
• Motor cranking test : Charging system test
• Safety Features
– Reverse polarity protection
– Automatic overload cut-off
– Overload alarm (optional)
• Battery Load Test Duration : 10 seconds (maxinum)
• Terminal Clips : 200 Amps high quality clips
• Dimension : (W)247mm x (D)167mm x (H)270mm
• Weight (KG) : 3.5




1066 SE-715 Superlite Battery Charger

Input Voltage : 220Vac ~ 240Vac (1 phase 50hz)
No of Battery : 7 x 12Vdc
Charging Current : Max 15Amp (Selectable)
Safety Protection : Input Fuse 10Amp, Output MCB 20Amp
Dimensions (mm) : 580 x 320 x 485 (W x D x H)
Weight : 39.0kg

 




1049 SE-915 Superlite Battery Charger

Input Voltage : 220Vac ~ 240Vac (1 phase 50hz)
No of Battery : 9 x 12Vdc
Charging Current : Max 15Amp (Selectable)
Safety Protection : Input Fuse 20Amp, Output MCB 20Amp
Dimensions (mm) : 580 x 320 x 485 (W x D x H)
Weight : 44.0kg

 




1174 RT-003 DHC Digital Battery System Analyzer

  • Application : 6V &12V Battery, 12V & 24V Charging / Starting System.
  • Application : 12V Start-Stop Batteries.
  • Operating Range : 40 – 2000CCA (SAE)
  • Rating system: SAE, DIN, EN, IEC, JIS
  • Voltmeter : 1.5V – 30V
  • Display : Back -lite Display, 4 Lines 16 Chracters LCD with adjustable brigtness.
  • Test Lead : 70 inch / 180cm
  • Language : English, French, Spanish, German, Italian, Portuguese
  • Dimension : L190 x W115 x H50(mm)



1144 STM-1215 Battery Charger

Model / Spec STM 1215
Input Voltage 220v ~ 240v (1 phase 50hz)
No of Battery 1 x 12v
Charging Current Max 15A (Low & High Selectable)
Safety Protection Input Fuse 2A, Output Fuse 15A
Dimension (WxDxH) 160mm x 220mm x 120mm
Weight 4.5kg



3432 18Ppcs Alternator Combination Socket Set

● Special designed two part socket for removing and replacing the free wheel pulley when you want to replace the alternator or pulley.
● Contents:
1pc M10 Spline Bit Socket with 33T Nut, 110mm(L.)
1pc M10 Spline Bit Socket with 31T Nut, 98mm(L.)
1pc M10 Spline Bit by 14mm Hex. Drive Tip, 57mm(L.)
1pc-M10 Spline Bit Socket, 110mm(L.)
1pc T50 TX-Star Bit Socket with 33T Nut, 110mm(L.)
2pc 75mm(L.) Spline : M8-10
2pc 75mm(L.) TX-Star : T40-50
2pc 75mm(L.) Hexagon : 8-10mm
1pc 33Teeth Alternator Nut with 17mm Hex. Tip
1pc 33Teeth Alternator Nut with 22mm Hex. Tip
1pc 22mm Hexagon Alternator Nut
1pc 28mm x 21mm Hexagon Alternator Nut
1pc 28mm x 19mm Hexagon Alternator Nut
1pc 4 points Alternator Nut with 17mm Hex. Tip
1pc- 1/2″ SQ.Dr. x 10mm Hex. Bit Adapter