Nitto PM Type Coupler

  • An excellent general purpose coupling for connecting factory air supply to pneumatic tools
  • Steel coupling is suitable for air.
  • Brass or or stainless steel is suitable for water.
  • Note: Fluid will come out from the plug when disconnected.
  • Critical structural parts of steel models are heat-treated for increased strength giving greater durability and resistance to wear.
  • Available in various body materials, sizes and end configurations applicable to a wide range of applications.
  • Specification:
    • Max working pressure: 1.5MPa (15kgf/cm2)
    • Working temperature: -20°C to -80°C
    • Seal Material: NBR
  • Made In JAPAN



6100-280 11″ (280mm) High Pressure Air Blow Gun

  • With 8mm tube and tapered outlet for infinitely variable flow.
  • Working pressure: under 15kg/cm2
  • The handle made from special harden plastic
  • Made In Taiwan



6100-100 4″ (100mm) High Pressure Air Blow Gun

  • With 8mm tube and tapered outlet for infinitely variable flow.
  • Working pressure: under 15kg/cm2
  • The handle made from special harden plastic
  • Made In Taiwan



6098 Taiwan PU Air Hose Reel 8mm x12mm x 10M (ABS Case)

  • ABS resin material case, against impact

  • Easy installation on the wall or the ceiling

  • PU and tetoron air hose can bear up to 300 psi (20bar)

  • High impact and corrosion resistant

  • Suitable for commercial workspaces, industrial workspaces, automotive garages, and machine shops

  • Free rotation within 160°.

  • Specification: Hose size: 8mm x 12mm x 10 meter

  • Made In Taiwan



6099 Taiwan Rubber Air Hose Reel 8mm x 15.5mm x 15meter (Steel case)

  • Made with thick steel for higher durability.

  • Easy installation on the wall or the ceiling

  • PU and tetoron air hose can bear up to 300 psi (20bar)

  • Suitable for commercial workspaces, industrial workspaces, automotive garages, and machine shops

  • Free rotation within 180°, and can be installed at 45°, 90°, and 135° fixed angle

  • Specification: hose size: 8mm (max pressure: 200psi)

  • Made in Taiwan



6092 IR-688-8 1″Dr Impact Wrench with 8″ Extended Anvil (Ingersoll Rand)

  • 3800 Nm
  • 8” extended anvil Heat-treated, precision-machined hammer mechanism
  • 2 protection rubber covers
  • Ergonomic handle
  • 3-position F/R power regulator
  • 45% air inlet bushing
  • Pinless single swinging-hammer impact mechanism
  • Design for vehicle service market
  • New design and superior machining ensure it can achieve better performance under high air pressure Through-hole socket retainer

Specification:

  • Bolt size: 55mm
  • Max Torque in Reverse ft-lb (NM) @90psi: 2340 (3180)
  • Max Torque in Reverse ft-lb (NM) @120psi: 2802 (3800)
  • Working Torque Range ft-lb (NM) @ 90psi: 200 ~ 2280 (271 ~ 3100)
  • Working Torque Range ft-lb (NM) @120psi: 200 ~ 2580 (271 ~ 3500)
  • Weight: 16.5kg
  • Length: 630mm
  • Max Free Speed RPM @ 90psi: 4100
  • Impact Per Min: 625
  • Recommended Air Inlet: 1/2″
  • Recommended Air Pressure: 8 ~ 10Ba
  • Made In China



6097 1/2″Dr Stubby Impact Wrench (EU-0217s)

● Innovative one thumb operation design
● 4 forward speed, 4 reverse speed
● 2 Step Trigger
● Handle Exhaust
● Blade with spring mounted to prevent dead-lock or power-less problem
Std. Bolt Cap: 9/16″ (14 mm)
Free Speed: 9,000 rpm
Working Torque Range: 25~500 ft-lbs (34~678 Nm)
Max. Torque: 650 ft-lbs (1085 Nm)
Length : 115 mm
Weight : 1.5 kg
Air Consumption: 26.5 cfm (750 L/min)
Min. Hose Size : 3/8″ (9.5 mm)
Air Pressure: 90 psi (6.2 bar)
Air Inlet: 1/4″ PT or NPT
● Made In Taiwan




6091 1/2″Dr Impact Wrench (EU-0217)

  • Innovative one thumb operation design
  • 4 forward speed, 4 reverse speed
  • 2 Step Trigger
  • Handle Exhaust
  • Blade with spring mounted to prevent dead-lock or power-less problem
  • Specification:
    • Std. Bolt Cap: 9/16″ (14 mm)
    • Free Speed: 9,000 rpm
    • Working Torque Range: 25~600 ft-lbs (34~814 Nm)
    • Max. Torque: 800 ft-lbs (1085 Nm)
    • Length : 140 mm
    • Weight : 1.82 kg
    • Air Consumption: 17 cfm (480 L/min)
    • Min. Hose Size : 3/8″ (9.5 mm)
    • Air Pressure: 90 psi (6.2 bar)
    • Air Inlet: 1/4″ PT or NPT
  • Made In Taiwan



6088 1/2”DR Air Ratchat

  • Ideal for small engine repairs, spark plug, water pump works, body work, radiator and air condition removal and replacement.
  • Ball and needle bearing construction Standard Bolt Cap : 10mm
  • Specification:
    • Square Drive: 1/2″Dr
    • Standard Bolt: 12 ~ 14mm
    • Free Speed: 160rpm
    • Torque: 50ft-lb
    • Air Consumption: 4cfm
    • Length: 260mm
    • weight: 1.2kg
    • Nose: 90
    • Air Inlet: 1/4″PT or NPT
    • Air Pressure: 90psi
    • Air Hose: 3/8″
  • Made In Taiwan



Swan Air Compressor

  • We dealing in 2 series of compressor.
    • S Series: SVP-202, SVP-203, SVP-205
    • H Series: HVP-203, HVP-205N, HVP-205V (Vertical), HVU-203E (Engine Driven)
  • Please attached catalogue for specification.
  • Swan Compressor is Product of Taiwan

 

 




NITTO Hi-Coupler

Item No Model Inlet
6038 20PH 1/4″
6039 30PH 3/8″
6040 40PH 1/2″
Item No Model Inlet
6041 20PM 1/4″
6042 30PM 3/8″
6043 40PM 1/2″
Item No Model Inlet
6044 20PF 1/4″
6045 30PF 3/8″
6046 40PF 1/2″
Item No Model Inlet
6047 20SH 1/4″
6048 30SH 3/8″
6049 40SH 1/2″
Item No Model Inlet
6050 20SM 1/4″
6051 30SM 3/8″
6052 40SM 1/2″
Item No Model Inlet
6053 20SF 1/4″
6054 30SF 3/8″
6055 40SF 1/2″



6011 Eraser Pad (Rod Arbor)

  • Diameter: size: 3-1/2”
  • Max Speed: use under 400rpm
  • Made in Taiwan